In a WaterBoss® water softener, water enters the tank by passing through the patented, built-in, self cleaning, whole house dirt and sediment filter. This whole house dirt and sediment filter traps any sediment that may be brought up from your well or any built up debris that may break away from piping.
The dirt and sediment filter features a patented neoprene screen that is laser welded to the poly propylene tank and packed with Ultrafil. This will reduce dirt and sediment to less than 20 microns, less than is capable for the human eye to see!
No longer will the home owner need to purchase a separate cartridge type filter as required by conventional water softeners and no longer will there be the mess and cost of periodically changing these filters.
The built in self-cleaning dirt and sediment filter is one of only several patented features that make the WaterBoss® the most efficient water softener on the retail market.
WaterBoss 700 Water Softener
WaterBoss® Model 700 Water Softeners are built to give whole-house efficiency. The Model 700 can soften up to 70 grains per gallon and reduce up to 10 ppm (parts per million) of ferrous iron, and filter dirt and sediment. This water softener is the solution for over 95% of all hard water conditions.
700 Water Softener Facts
Regeneration
The WaterBoss® Model 700 takes 18 minutes and uses only 16 gallons of water and 2.5 lbs of salt for the regeneration process.
WaterBoss 900 Water Softener
WaterBoss® Model 900 Water Softeners, the high usage model, is the model for large families. The Model 900 can soften up to 90 grains per gallon while reducing up to 10 ppm (parts per million) of ferrous iron, and filter dirt and sediment.
900 Water Softener Facts
Regeneration
The WaterBoss® Model 900 Water Softener takes just 21 minutes and uses around 15 gallons of water and 3 lbs of salt for the regeneration process.
WaterBoss 950 Water Softener
If you live in the city, the WaterBoss® Model 950 Water Softener is the one for you. The 950 Water Softeners can soften up to 35 grains per gallon and at the same time reduce chlorine taste and odours.
950 Water Softener Facts
Regeneration
The Model 950 takes about 19 minutes and uses only 15 gallons of water for the regeneration process. In addition, 2.5 pounds of salt are needed for regeneration.